HI-35880

The HI-35880 from Holt Integrated Circuits is a silicon gate CMOS device for interfacing a Serial Peripheral Interface (SPI) enabled microcontroller to an ARINC 429 serial bus. It is a drop-in replacement for Holt’s popular HI-3588, with a much improved SPI of 12 MHz. This greatly improves host efficiency over the previous device.

The device provides one receiver with user-programmable label recognition for any combination of 256 possible labels, a 32 by 32 Receive FIFO and an analog line receiver. Receive FIFO status can be monitored using the programmable external interrupt pin, or by polling the HI-35880 Status Register. Other features include the ability to switch the bit-signifiance of ARINC 429 labels. The ARINC input pins are available with different input resistance values to provide flexibility when adding external lightning protection circuitry.

The Serial Peripheral Interface minimizes the number of host interface signals allowing for a small footprint device which can be interfaced to a wide variety of industry-standard microcontrollers supporting SPI. Alternatively, the SPI signals may be controlled using just four general purpose I/O port pins from a microcontroller or custom FPGA. The SPI and all control signals are CMOS and TTL compatible and support 3.3V or 5V operation.

The HI-35880 checks received data against ARINC 429 electrical, timing and protocol requirements. ARINC 429 databus timing comes from a 1 MHz clock input, or an internal counter can derive it from higher clock frequencies having certain fixed values, possibly the external host processor clock.

Features

  • ARINC specification 429 compliant
  • 3.3V or 5.0V logic supply operation
  • Drop-in replacement for Holt’s HI-3588 with improved SPI host interface (12 MHz)
  • On-chip analog line receiver connects directly to the ARINC 429 Bus
  • Programmable label recognition for 256 labels
  • 32 x 32 Receive Data FIFO
  • Programmable data rate selection
  • High-speed, four-wire, 12 MHz SPI
  • Label bit-order control
  • Parity checking may be disabled to allow 32-bit data reception
  • Low power
  • Industrial and extended temperature ranges available

Applications

  • Avionics data communication
  • Serial to parallel conversion
  • Parallel to serial conversion
Part #Package DescriptionTemp RangeFlowMoisture Sensitivity LevelRoHS Compliant
HI-35880PCIF44 Pin Plastic 7mm x 7mm Chip-Scale Package (QFN)-40°C to +85°CI3Yes
HI-35880PCTF44 Pin Plastic 7mm x 7mm Chip-Scale Package (QFN)-55°C to +125°CT3Yes
HI-35880PQI44 Pin Plastic Quad Flat Pack (MQFP)-40°C to +85°CI3No
HI-35880PQIF44 Pin Plastic Quad Flat Pack (MQFP)-40°C to +85°CI3Yes
HI-35880PQM44 Pin Plastic Quad Flat Pack (MQFP)-55°C to +125°CM3No
HI-35880PQMF44 Pin Plastic Quad Flat Pack (MQFP)-55°C to +125°CM3Yes
HI-35880PQT44 Pin Plastic Quad Flat Pack (MQFP)-55°C to +125°CT3No
HI-35880PQTF44 Pin Plastic Quad Flat Pack (MQFP)-55°C to +125°CT3Yes
Picture of ADK-35850: ARINC 429 Single Receiver, Single Transmitter Evaluation Board
ADK-35850: ARINC 429 Single Receiver, Single Transmitter Evaluation Board
The Holt ADK-35850 Evaluation board demonstrates the features of Holt’s HI-35850 ARINC 429 protocol IC. The HI-35850 includes a single ARINC 429 line receiver and a single ARINC 429 line driver, along ARINC 429 specification digital protocol. The HI-35850 is a new version of Holt's well known HI-3585, with a much improved 12MHz SPI host interface.
Downloads
Data Sheets
Demo Kit User Guide