HI-1592

The HI-1592 is a radiation-hardened, hermetically packaged MIL-STD-1553 dual transceiver designed for use in high reliability MIL-STD-1553 applications, such as launch vehicles, high altitude aircraft and space. As aircraft fly at higher altitudes or in space they become more susceptible to exposure to cosmic rays, resulting in effects such as single-event transient (SET), single-event functional interrupt (SEFI), single event latch-up (SEL) and single event burnout (SEB), any of which could result in degradation or failure of electronic equipment. To that end, electronic equipment designed to fly in these environments needs some level of latch-up immunity or radiation hardness assurance (RHA) against the effects of cosmic rays.

 

The HI-1592 is designed to provide latch-up immunity up to an LET of 67.7 MeV-cm2/mg and an RHA total ionizing dose (TID) of 100 krad(Si). It is ideal for launch vehicle and high-altitude aircraft applications utilizing MIL-STD-1553 data bus communication. 

 

The device also features 1.8V, 2.5V and 3.3V compatible digital I/O, making it easier to interface with a broader range of FPGAs and controllers.

 

The transmitter takes complementary CMOS / TTL Manchester II bi-phase data and converts it to differential voltages suitable for driving the bus isolation transformer. Separate transmitter inhibit control signals are provided for each bus. The receiver section of the each bus converts the 1553 bus bi-phase analog signals to complementary CMOS / TTL data suitable for input to a Manchester decoder. Each receiver has a separate enable input, which forces the receiver outputs to the bus idle state (logic "0") when low.

 

Features

  • Robust Silicon-On-Insulator (SOI) CMOS technology
  • RHA Total Ionizing Dose (TID)
    • 100 krad(Si) High Dose Rate
  • Single-Event Effect (SEE) hardness
    • SEB and SEL free up to 67.7 MeV-cm2/mg
    • SET and SEFI characterized up to 67.7 MeV-cm2/mg
  • MIL-PRF-38535 compliant
  • 1.8V, 2.5V and 3.3V compatible digital I/O
  • Extended temperature range with optional burn-in

 

Applications

  • Launch Vehicles
  • High altitude aircraft MIL-STD-1553 Terminals
  • Low-orbit satellites
  • Flight Control and Monitoring
  • ECCM Interfaces
  • Radar Systems

 

 

 

Loading...
ADK-1592: HI-1592 Rad-Hard MIL-STD-1553 Transceiver Evaluation Board

ADK-1592: HI-1592 Rad-Hard MIL-STD-1553 Transceiver Evaluation Board

The HI-1592 is a radiation-hardened MIL-STD-1553 transceiver. The HI-1592 Evaluation Board (EV-1592) provides a convenient way to evaluate the device features and is composed of a HI-1592 transceiver and associated circuitry to support FPGAs or driverless MIL-STD-1553 protocol controllers.
More Information